Rinforzo di Archi e Volte in Foglio, confronto tra FRP e FRCM

Prove a rottura in cantiere su volta in foglio con sistemi FRP e FRCM.

TCS cerca nuovi agenti per Lombardia, Emilia Romagna e Piemonte per ampliare la propria rete

TCS è alla ricerca di una figura professionale da inserire nello staff.

Adesivo rasante biocompatibile preconfezionato

ADE RAS is a biocompatible, smoothing adhesive compound, pre-packaged powder for interior and exterior use according to standard UNI EN 998-1: 2010. ADE RAS is totally free of cement and compounds belonging to the clinker group. It consists of a mixture of pure silicate calcareous sands, screened with continuous grain size arc from 0 to 0.6 mm. The only binder present is ST-ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any kind. Natural additives give the product excellent applicability,smoothability and adhesion to the substrate.

Malta strutturale biocompatibile, preconfezionata

B-STRUCTURA is a Biocompatible structural mortar, pre-packaged powder for interior and exterior use according to standard UNI EN 998-2: 2010. B-STRUCTURA is totally free of cement and compounds belonging to the clinker group. It consists of a mixture of pure calcareous sands, screened with continuous grain size arc from 0 to 1.4 mm. The binder consists of ST-ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1 and Metakaolin. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any kind.

 

termointonaco a calce

CLIMATHERM M is a Biocompatible Eco Plastering, Insulating, Dehumidifying pre-packaged powder for interior and exterior use, according to standard UNI EN 998-1:2010. CLIMATHERM M is totally free of cement or compounds belonging to the clinker group. It consists of a mixture of pure mineral sands, expanded with low specific weight, screened with continuous grain size arc from 0 to 4 mm. The only binder present is ST-ASTIER Pure Natural Hydraulic Lime NHL 5 according to UNI EN 459-1 standard. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any kind.

Calce idraulica naturale pura a bassa resistenza

The NHL 2 is a pure white low resistance St ASTIER Pure Natural Hydraulic Lime, produced using the use of selected siliceous limestones. The baking of the limestones is carried out in vertical ovens at a temperature below 1250°C and reduced in powder by only the breakdown of calcium oxide, without the need for grinding. NHL 2 is totally devoid of pozzolanic materials, blast furnace slags, flying ash or hydraulic binders of any kind (clinker, cement, etc.), VOCs and according to Standard UNI EN 459-1.

Tonachino minerale biocompatibile

STORICAL MARMO LUSTRO is a biocompatible mineral intonaco plaster finish, a ready to use paste. It consists of impalpable marble and lime putty powders obtained by baking pure limestones in vertical ovens at temperatures below 900°C, classified with the CL 90-S PL mark according to UNI EN 459-1. The product is available in white or mass-coloured with light resistant inorganic pigments to perform high quality smoothing coats with special chromatic effects, glossiness and compactness.

Tonachino minerale biocompatibile

STORICAL TONACHINO 1.1 is a biocompatible mineral Intonachino plaster finish a ready to use paste. It consists of a mixture of pure carbonate sand, selected with a continuous grain size arc from 0 to 1.1 mm and lime putty obtained by baking pure limestone in vertical ovens at temperatures lower than 900°C, classified with the CL 90-S PL marking according to UNI EN 459-1. STORICAL TONACHINO 1.1 can be used in natural white colour or mass-coloured with light resistant inorganic pigments for the execution of fine levelled coatings for interior and exterior use.

Subscribe to our newsletter

  I declare that I have read and acknowledged the Information drawn up according to Legislative Decree 196/2003 'Code Concerning the Protection of Personal Data' and I give my consent to utilise my personal data in order to make use of the 'Newsletter' service with the methods described in the above-mentioned Information