WATERPROOFING

WATERPROOFING

Waterproofing

Adesivo rasante biocompatibile preconfezionato

ADE RAS is a biocompatible, smoothing adhesive compound, pre-packaged powder for interior and exterior use according to standard UNI EN 998-1: 2010. ADE RAS is totally free of cement and compounds belonging to the clinker group. It consists of a mixture of pure silicate calcareous sands, screened with continuous grain size arc from 0 to 0.6 mm. The only binder present is ST-ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any kind. Natural additives give the product excellent applicability,smoothability and adhesion to the substrate.

Malta strutturale biocompatibile, preconfezionata

B-STRUCTURA is a Biocompatible structural mortar, pre-packaged powder for interior and exterior use according to standard UNI EN 998-2: 2010. B-STRUCTURA is totally free of cement and compounds belonging to the clinker group. It consists of a mixture of pure calcareous sands, screened with continuous grain size arc from 0 to 1.4 mm. The binder consists of ST-ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1 and Metakaolin. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any kind.

 

Malta strutturale biocompatibile, preconfezionata fibrorinforzata

B-STRUCTURE 15F; Fibre-reinforced structural mortar, pre-packaged powder for internal and external use according to UNI EN 998-2: 2010. B-STRUCTURE 15F; consisting of a mixture pure calcareous sand, screened with continuous grain size arc from 0 to 1.4 mm. The binder consists of SAINT-ASTIER Pure NHL 5 Natural Hydraulic Lime, according to standard UNI EN 459-1 and Pozzolan. The white lime NHL 5, produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the breakdown of calcium oxide.

Malta strutturale biocompatibile

B-STRUCTURA is a Biocompatible structural mortar, pre-packaged powder for interior and exterior use according to standard UNI EN 998-2: 2010. B-STRUCTURA is totally free of cement and compounds belonging to the clinker group. It consists of a mixture of pure calcareous sands, screened with continuous grain size arc from 0 to 3 mm. The binder consists of ST-ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1 and Metakaolin. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any kind.

Miscela per iniezioni composta da calce idraulica naturale

The mixture for B-STRUCTURA INIEZIONE injections consists of a pure white high-strength NATURAL HYDRAULIC LIME, produced by the use of selected siliceous limestones. The baking of the limestones is carried out in vertical ovens at a temperature below 1250°C and reduced in powder by only the breakdown of calcium oxide, without the need for grinding. The binder consists of only NHL 5 totally free of pozzolanic materials, blast furnace slags, flying ash or hydraulic binders of any kind (clinker, cement, etc.), VOCs and according to Standard UNI EN 459-1.

Miscela per iniezioni composta da calce idraulica naturale e metacaolino

La miscela per iniezioni B-STRUCTURA INIEZIONE OPUS è composta da CALCE IDRAULICA NATURALE pura ad alta resistenza di colore bianco, prodotta mediante l’impiego di calcari silicei selezionati e metacaolino. La cottura dei calcari avviene in forni verticali a temperatura inferiore a 1250°C e ridotta in polvere mediante il solo spegnimento dell’ossido di calcio, senza necessità di macinazione. Il legante NHL 5 è totalmente privo di materiali pozzolanici, scorie d’altoforno, ceneri volanti o leganti idraulici di qualsiasi natura (clinker, cemento ecc.), VOC ed è conforme alla Norma UNI EN 459-1.

Eco intonaco biocompatibile preconfezionato

BIO 130 is a Biocompatible Eco Plaster, pre-packaged powder for interior and exterior use, compliant with standard UNI EN 998-1:2010. BIO 130 is totally free of cement or compounds belonging to the clinker group. It consists of a mixture of pure silicate calcareous sands, screened with continuous grain size arc from 0 to 1.6 mm. The only binder present is SAINT-ASTIER Pure Natural Hydraulic Lime NHL5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any type.

termointonaco - intonaco isolante

CLIMATHERM is a Biocompatible Eco Plastering, Insulating, Dehumidifying pre-packaged powder for interior and exterior use, according to standard UNI EN 998-1:2010. CLIMATHERM M is totally free of cement or compounds belonging to the clinker group. It consists of a mixture of pure mineral sands, expanded with low specific weight, screened with continuous grain size arc from 0 to 4 mm. The only binder present is ST-ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by the breakdown of calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any kind.

termointonaco a calce

CLIMATHERM M is a Biocompatible Eco Plastering, Insulating, Dehumidifying pre-packaged powder for interior and exterior use, according to standard UNI EN 998-1:2010. CLIMATHERM M is totally free of cement or compounds belonging to the clinker group. It consists of a mixture of pure mineral sands, expanded with low specific weight, screened with continuous grain size arc from 0 to 4 mm. The only binder present is ST-ASTIER Pure Natural Hydraulic Lime NHL 5 according to UNI EN 459-1 standard. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any kind.

Malta biocompatibile priva di cemento

OPUS SIGNINUM is a biocompatible mortar, to be prepared on site, free of cement or compounds belonging to the clinker group, consisting of opus signinum obtained from the crushing of low temperature cooked clay (solid bricks, tiles) with continuous grain size curve from 0 to 4 mm OPUS SIGNINUM 0-4 TCS and ST-ASTIER Pure Natural Hydraulic Lime of NHL 3.5 according to the standard UNI EN 459-1 white, produced by baking at temperatures below 1250°C of siliceous limestone and reduced in powder by the calcium oxide only, without the addition of pozzolanic materials or hydraulic binders any kind.

Eco intonaco biocompatibile preconfezionato

ECO-CAL is a Biocompatible Eco Plaster, pre-packaged powder for interior and exterior use according to UNI EN 998-1:2010. ECO-CAL is totally free of cement and compounds belonging to the clinker group. It is made up of a mixture of pure silicone calcareous sands with a continuous grain size arc from 0 to 1.4 mm. The only present binder is the St ASTIER Pure Natural Hydraulic Lime NHL5 according to UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the break down of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Tonachino rasante biocompatibile preconfezionato

INTOCIVILE 0.0 NATURALE is a biocompatible smoothing compound for intonachino plaster finish, pre-packaged powder, for interior and exterior use, according to standard UNI EN 998-1: 2010. INTOCIVILE 0.0 NATURALE is totally free of cement and compounds belonging to the clinker group. It is made up of a mixture of pure calcareous-siliceous sands, screened with a fine continuous grain size arc. The only present binder is the St ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the break down of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Tonachino rasante biocompatibile preconfezionato

INTOCIVILE 0.4 NATURALE is a biocompatible smoothing compound for intonachino plaster finish, pre-packaged powder, for interior and exterior use, according to standard UNI EN 998-1:2010. INTOCIVILE 0.4 NATURALE is totally free of cement and compounds belonging to the clinker group. It consists of a mixture of pure silicate calcareous sand, screened with continuous grain size arc from 0 to 0.4 mm. The only present binder is the St ASTIER Pure Natural Hydraulic Lime NHL 5 according to Standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the break down of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Tonachino rasante biocompatibile preconfezionato

INTOCIVILE 0.8 BIANCO BOTTICINO is a biocompatible smoothing compound for intonachino plaster finish pre-packaged powder for interior and exterior use according to UNI EN 998-1:2010. INTOCIVILE 0.8 BIANCO BOTTICINO is totally free of cement and compounds belonging to the clinker group. It consists of a mixture of pure silicate calcareous sand, screened with continuous grain size arc from 0 a 0.8 mm. The only present binder is the St ASTIER Pure Natural Hydraulic Lime NHL 5 according to Standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the break down of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Tonachino rasante biocompatibile preconfezionato

INTOCIVILE 0.8 NATURALE is a biocompatible, smoothing compound for intonachino plaster finish pre-packaged powder for internal and external use, according to standard UNI EN 998-1: 2010. INTOCIVILE 0.8 NATURALE is totally free of concrete and compounds belonging to the clinker group. It is made up of a mixture of pure siliceous calcareous sands, screened with continuous grain size arc from 0 to 0.8 mm. The only binder is the ST -ASTIER Pure Natural Hydraulic Lime NHL 5 by compliant with the UNI EN 459-1 standard. Lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250° C and reduced to powder by only the breakdown of the calcium oxide without the addition of pozzolanic or hydraulic binders of any kind.

Eco intonaco biocompatibile, pigmentato

INTOCOLOR is a Biocompatible Eco Plaster, Pigmented with natural soil, pre-packaged powder for interior and exterior use according to standard UNI EN 998-1: 2010. INTOCOLOR is totally free of cement and compounds belonging to the clinker group and is made up of a mixture of pure limestone sands, screened with a continuous grain size arc from 0 to 2.5 mm. The only present binder is the St-ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the break down of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Eco intonaco biocompatibile, pigmentato

INTOCOLOR F is a Biocompatible Finish Eco Plaster, Pigmented with natural soil, pre-packaged powder for interior and exterior according to UNI EN 998-1: 2010. INTOCOLOR F is totally free of cement and compounds belonging to the clinker group and is made up of a mixture of pure limestone sands, screened with continuous grain size arc from 0 to 1.2 mm. The only present binder is the SAINT-ASTIER Natural Pure Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any kind.

Eco intonaco Biocompatibile, deumidificante leggero

INTOPORE is an Eco Biocompatible Plaster, light Dehumidifier, pre-packaged powder for interior and exterior use, according to standard UNI EN 998-1: 2010. INTOPORE is totally free of cement or compounds belonging to the clinker group. It consists of a mixture of pure silicate calcareous sand, screened with continuous grain size arc from 0 a 5 mm. The only present binder is the St -ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the breakdown of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Eco intonaco biocompatibile leggero ad alta resistenza

INTOPORE AR is an Eco Biocompatible, Dehumidifying Plaster, pre-packaged powder for internal and external use according to the standard UNI EN 998-1: 2010. INTOPORE AR is totally free concrete and compounds belonging to the clinker group. It is made up of a mixture of pure mineral sands expanded with a low specific weight and screened with continuous grain size arc from 0 to 5 mm. The only binder is the ST ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. Lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250° C and reduced to powder by only the breakdown of the calcium oxide without the addition of pozzolanic or hydraulic binders of any kind.

Eco intonaco biocompatibile deumidificante preconfezionato

INTOSTORICO is biocompatible Eco-Plaster, Dehumidifying, and pre-packaged powder for internal and external use, according to standard UNI EN 998-1: 2010. INTOSTORICO is totally free of concrete and compounds belonging to the clinker group and consists of a mixture of pure limestone sands screened with continuous grain size arc from 0 to 2.5 mm. The only binder is ST ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250° C and reduced to powder by only the breakdown of the calcium oxide without the addition of pozzolanic or hydraulic binders of any kind.

calce e canapa per intonaci e sottofondi

ISOCANNA is hemp chipboard obtained through separation by a mechanical process of the woody part from the fibrous side and then reduced in pieces of about 6 mm long for the use with Pure Natural Hydraulic Lime NHL 3.5. The mixing of ISOCANNA with Pure Natural Hydraulic Lime NHL 3.5 originates from a totally Natural compound, highly Breathable, Biocompatible, Thermally and totally Recyclable.

Sottofondo alleggerito isolante Biocompatibile

ISOLFONDO is a lightweight, biocompatible insulating subbase, pre-packaged powder for interior and exterior use, according to standard UNI EN 13813. ISOLFONDO is free from cement or compounds belonging to the clinker group. It consists of a mixture of pure mineral sands, expanded with low specific weight, screened with continuous grain size arc from 0 to 5 mm. The only binder present is ST ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the breakdown of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Fondo minerale biocompatibile

KAPPASIL FONDO is a biocompatible mineral primer consists of a modified Potassium Silicate solution, according to Standard DIN 18363. It acts as a regulator for the substrate absorber and, in the presence of micro hairline cracks, restores cohesion. Its use prepares the surface to accommodate the finishing layer, contributing to its durability and final aspect of the same.

Pittura minerale biocompatibile

KAPPASIL PITTURA is a biocompatible mineral paint, consists of pure carbonated flours and a modified Potassium Silicate solution according to Standard DIN 18363. It is mass-coloured with light resistant inorganic pigments for painting, glazing or whitewashing.

Fondo minerale riempitivo biocompatibile

KAPPASIL RIEMPITIVO is a biocompatible filler mineral primer composed of a mixture of pure carbonate sand and modified Potassium Silicate, according to Standard DIN 18363. It acts as a regulator for the substrate absorber and, in the presence of micro hairline cracks, restores cohesion. Its use prepares the surface to accommodate the finishing layer, contributing to its durability and final aspect of the same.

Tonachino minerale biocompatibile

KAPPASIL TONACHINO 0.75 is a biocompatible mineral intonachino plaster finish. It consists of a mixture of pure carbonate sand, selected with a continuous granulometric arc between 0 and 0.75 mm and modified Potassium Silicate, according to Standard DIN 18363. It is mass-coloured with natural inorganic pigments, light-resistant, for the execution of fine levelled coatings for interior and exterior use.

Tonachino minerale biocompatibile

KAPPASIL TONACHINO 1.1 is a biocompatible mineral intonachino plaster finish. It consists of a mixture of pure carbonate sand, selected with a continuous granulometric arc between 0 and 1.1 mm and modified Potassium Silicate, according to Standard DIN 18363. It is mass-coloured with natural inorganic pigments, light-resistant, for the execution of fine levelled coatings for interior and exterior use.

Tonachino minerale biocompatibile

KAPPASIL TONACHINO 1.5 is a biocompatible mineral intonachino plaster finish. It consists of a mixture of pure carbonate sand, selected with a continuous granulometric arc between 0 and 1.5 mm and modified Potassium Silicate, according to Standard DIN 18363. It is mass-coloured with natural inorganic pigments, light-resistant, for the execution of fine levelled coatings for interior and exterior use.

Tonachino minerale biocompatibile in polvere

LARIO 0.75 is a biocompatible smoothing compound for intonachino plaster finish, pre-packaged White powder, for interior and exterior finish coatings, according to standard UNI EN 998-1: 2010. LARIO 0.75 is totally free of cement and compounds belonging to the clinker group. It consists of a mixture of White limestone sand of Carrara, screened with a continuous granulometric arc from 0 to 0.75 mm. The only binder present is Natural Lime according to standard UNI EN 459-1. The white lime is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the break down of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Tonachino minerale biocompatibile in polvere

LARIO 1.1 is a biocompatible smoothing compound for intonachino plaster finish, pre-packaged White powder, for interior and exterior finish coatings, according to standard UNI EN 998-1: 2010. LARIO 0.75 is totally free of cement and compounds belonging to the clinker group. It consists of a mixture of white limestone sand of Carrara, screened with a continuous granulometric arc from 0 to 1.1 mm. The only binder present is Natural Lime according to standard UNI EN 459-1. The white lime is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the break down of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Massetto drenante biocompatibile

MASSETTO DRENANTE is a biocompatible draining screed, pre-packaged powder for interior and exterior use, according to standard UNI EN 13813. MASSETTO DRENANTE is free from cement or compounds belonging to the clinker group. It is made up of a mixture of pure mineral sands, screened with 1.5 to 3.5 mm continuous grain size arc without fine particles. The only present binder is the ST ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the breakdown of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Calce idraulica naturale pura a bassa resistenza

The NHL 2 is a pure white low resistance St ASTIER Pure Natural Hydraulic Lime, produced using the use of selected siliceous limestones. The baking of the limestones is carried out in vertical ovens at a temperature below 1250°C and reduced in powder by only the breakdown of calcium oxide, without the need for grinding. NHL 2 is totally devoid of pozzolanic materials, blast furnace slags, flying ash or hydraulic binders of any kind (clinker, cement, etc.), VOCs and according to Standard UNI EN 459-1.

Calce idraulica naturale pura di colore bianco

NHL 3,5 is a pure white high-resistant ST ASTIER Pure Natural Hydraulic Lime, produced using the use of selected siliceous limestones. The baking of the limestones is carried out in vertical ovens at a temperature below 1250°C and reduced in powder by only the breakdown of calcium oxide, without the need for grinding. NHL 3,5 is totally free of pozzolanic materials, blast furnace slags, flying ash or hydraulic binders of any kind (clinker, cement, etc.), VOCs and according to Standard UNI EN 459-1.

Calce idraulica naturale pura ad alta resistenza

NHL 5 is a pure white high-resistant St ASTIER NATURAL HYDRAULIC LIME, produced using the use of selected siliceous limestones. The baking of the limestones is carried out in vertical ovens at a temperature below 1250°C and reduced in powder by only the breakdown of calcium oxide, without the need for grinding. NHL 5 is totally free of pozzolanic materials, blast furnace slags, flying ash or hydraulic binders of any kind (clinker, cement, etc.), VOCs and according to Standard UNI EN 459-1.

Tonachino rasante biocompatibile preconfezionato

PASTELLONE is a compact satin-effect, smoothing compound for intonachino plaster finish, biocompatible, pre-packaged powder for internal and external use according to the standard UNI EN 998-1: 2010. PASTELLONE is totally free of concrete and compounds belonging to the clinker group. It is made up of a mixture of pure silicate calcareous sands, screened with continuous grain size arc from 0 to 0.4 mm. The only binder is the ST -ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking silica limestones at temperatures below 1250° C and reduced to powder by only the breakdown of the calcium oxide without the addition of pozzolanic or hydraulic binders of any kind.

Massetto alleggerito biocompatibile

POMICA MASSETTO is a lightweight, Biocompatible screed, pre-packaged powder for interior and exterior use, according to standard UNI EN 13813. POMICA MASSETTO is free from cement or compounds belonging to the clinker group. It consists of a mixture of pure mineral sands, expanded with low specific weight, screened with continuous grain size arc from 0 to 5 mm. The only binder present is St ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the breakdown of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Malta da rinzaffo biocompatibile

SPRIZZO ANTISALE is a Biocompatible repair and restoration mortar pre-packaged powder for internal and external use according to UNI EN 998-1: 2010. SPRIZZO ANTISALE is totally free of cement and compounds belonging to the clinker group and is made up of a mixture of pure limestone sands, screened with a continuous granulometric arc from 0 to 2.5 mm, and natural putty regulators of the final porosity. The only present binder is the ST ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by calcium oxide only, without the addition of pozzolanic materials or hydraulic binders of any kind.

Malta da rinzaffo biocompatibile

SPRIZZO Ponte di adesione is a Biocompatible repair and restoration mortar, pre-packaged powder for internal and external use according to UNI EN 998-1: 2010. SPRIZZO is totally free of cement and compounds belonging to the clinker group and consists of a mixture of pure limestone sands, screened with continuous granulometric arc from 0 to 2.5 mm, and higher quality compounds which improve adesione properties to the substrate. The only present mineral binder is ST ASTIER Pure Natural Hydraulic Lime NHL 5 according to standard UNI EN 459-1. The lime NHL 5, white, is produced by baking siliceous limestones at temperatures below 1250°C and reduced in powder by only the break down of calcium oxide, without the addition of pozzolanic materials or hydraulic binders of any kind.

Pittura minerale biocompatibile

STORICAL AFFRESCO is a biocompatible mineral paint consists of only Lime putty obtained by baking pure limestones in vertical ovens at temperatures below 900° C, long cured, totally hydrated and classified with the CL 90-S PL marking according to standard UNI EN 459-1. It is used naturally or mass-coloured with light resistant inorganic pigments for painting, glazing or whitewashing.

Puro grassello di calce costituito da idrossido di calcio

STORICAL CL90 is pure lime putty made exclusively of calcium hydroxide Ca (OH) 2> 98% totally hydrated. STORICAL CL90 obtained by baking pure limestones in vertical ovens at temperatures below 900°C, long cured, at least 24 months, totally hydrated and classified with the CL 90-S PL mark according to UNI EN 459-1. STORICAL CL90 is free of any impurities such as lime crumbs or lime lumps.

Tonachino minerale biocompatibile

STORICAL MARMO LUSTRO is a biocompatible mineral intonaco plaster finish, a ready to use paste. It consists of impalpable marble and lime putty powders obtained by baking pure limestones in vertical ovens at temperatures below 900°C, classified with the CL 90-S PL mark according to UNI EN 459-1. The product is available in white or mass-coloured with light resistant inorganic pigments to perform high quality smoothing coats with special chromatic effects, glossiness and compactness.

Tonachino minerale biocompatibile

STORICAL MARMO OPACO is a biocompatible mineral Intonachino plaster finish, a ready to use paste. It consists of impalpable marble powders, chromatically selected aggregates and lime putty obtained by baking pure limestones in vertical ovens at temperatures below 900°C, classified with the CL 90-S PL mark according to UNI EN 459-1. The product is mass-coloured with light resistant inorganic pigments to perform high quality smoothing coats with special chromatic effects and compactness.

Tonachino minerale biocompatibile

STORICAL TONACHINO 0.35 is a biocompatible mineral Intonachino plaster finish a ready to use paste. It consists of a mixture of pure carbonate sand, selected with a continuous grain size arc from 0 to 0.35 mm and lime putty obtained by baking pure limestone in vertical ovens at temperatures lower than 900°C, classified with the CL 90-S PL marking according to UNI EN 459-1. STORICAL TONACHINO 0.35 can be used in white natural colour or mass-coloured with light resistant inorganic pigments for the execution of fine plaster or spot-faced coatings for interior and exterior use.

Tonachino minerale biocompatibile

STORICAL TONACHINO 0.75 is a mineral biocompatible Intonachino plaster finish a ready to use paste. It consists of a mixture of pure carbonate sand, selected with a continuous grain size arc from 0 to 0.75 mm and lime putty obtained by baking pure limestone in vertical ovens at temperatures lower than 900°C, classified with the CL 90-S PL marking according to UNI EN 459-1. STORICAL TONACHINO 0.75, can be used in natural white or mass-coloured with light resistant with inorganic pigments for the execution of fine levelled coatings for interior and exterior use.

Tonachino minerale biocompatibile

STORICAL TONACHINO 1.1 is a biocompatible mineral Intonachino plaster finish a ready to use paste. It consists of a mixture of pure carbonate sand, selected with a continuous grain size arc from 0 to 1.1 mm and lime putty obtained by baking pure limestone in vertical ovens at temperatures lower than 900°C, classified with the CL 90-S PL marking according to UNI EN 459-1. STORICAL TONACHINO 1.1 can be used in natural white colour or mass-coloured with light resistant inorganic pigments for the execution of fine levelled coatings for interior and exterior use.

Tonachino minerale biocompatibile

STORICAL TONACHINO NATURALE is a biocompatible mineral Intonachino plaster finish a ready to use paste. It consists of a mixture of chromatically selected and screened sands with a continuous grain size arc from 0 to 0.75 mm and, as the sole binder, lime putty obtained by baking pure limestones in vertical ovens at temperatures below 900°C, classified with the CL 90- S PL mark according to UNI EN 459-1. It is mass-coloured with inorganic pigments, light-resistant, for the execution of fine levelled coatings for interior and exterior use.

Tonachino minerale biocompatibile

STORICAL TONACHINO SABBIETTA TICINO TICINO is a biocompatible mineral intonachino plaster finish, a ready to use paste. It consists of a mixture of chromatically selected and screened sands with a continuous grain size arc from 0 to 0.75 mm and, as the sole binder, lime putty obtained by baking pure limestones in vertical ovens at temperatures below 900°C, classified with the CL 90- S PL mark according to UNI EN 459-1. It is mass-coloured with inorganic pigments, light-resistant, for the execution of fine levelled coatings for interior and exterior use.

Iimpregnante consolidante Silicato di Etile

TC 35 is a Consolidating impregnating product consisting of Ethyl Silicate. The low molecular weight and low viscosity optimize the penetrating capacity of the consolidating agent by generating bonds with the mineral substrate, increasing its mechanical strength. The product is specific for brick, natural stone, plaster works and any other mineral substrate as long as it absorbent.

Pasta composta da copolimeri vinilversatici in emulsione

TC AGGRAPPANTE Adhesive Promoter is a paste consisting of dispersion copolymerization of vinyl in emulsion and carbonate aggregates in continuous granulometric curve from 0 to 2 mm. Specific to obtain rough surfaces suitable for receiving the next layer of plaster or of smoothing compound.

Emulsione acrilica che svolge con azione consolidante

TC RINFORZANTE is an acrylic emulsion, which performs a consolidating and regulating action of absorption. It is used to increase the strength and adhesion to the substrate of the materials in which it is used.

Tessuto a rete in fibra di basalto bilanciata

TCS BASALT R240 is a mesh fabric in basalt fibre mesh balanced made of thread with alkali-resistant coating in weft and dry fibre in warp. The mesh is thermowelded by a thermo yarn in both weft and warp to ensure excellent stability of laying and workability on the construction site while maintaining a perfect alignment of the fibres. The mesh is applicable both with organic matrix for the production of FRP composite materials or inorganic matrix for the production of FRCM composite materials.

Tessuto unidirezionale in fibra di carbonio

TCS CARBON U400HM is a unidirectional carbon fibre with high modulus. The fabric is thermowelded by a thermo yarn in weft to ensure excellent stability of laying and workability on the construction site maintaining a perfect alignment of the fibres. The fabric is in dry fibre applicable with organic matrix for the production of FRP composite materials.

Rete in fibra di vetro con trattamento antialcali

TCS GLASS CK100 is a fibreglass mesh with anti-alkali treatment. The mesh ensures an excellent laying stability and workability on the construction site while maintaining a perfect alignment of the fibres. TCS GLASS CK100 is applicable with inorganic matrix of Natural Hydraulic Lime NHL 5 or traditional for the production of reinforced plasters.

Rete in fibra di vetro con trattamento antialcali

TCS GLASS CK155 is a fibreglass mesh with anti-alkali treatment. The mesh ensures an excellent laying stability and workability on the construction site while maintaining a perfect alignment of the fibres. TCS GLASS CK155 is applicable with inorganic matrix of Natural Hydraulic Lime NHL 5 or traditional for the production of reinforced smoothing coats or external insulation systems.

Rete composita in fibra di vetro realizzata con filato in vetro

TCS GLASS N350 is a composite fibreglass mesh made of E glass yarn with alkali resistant coating. The mesh in FRP ensures an excellent laying stability and workability on the construction site while maintaining a perfect alignment of the fibres. The mesh is applicable with an inorganic matrix, in particular with a natural hydraulic lime matrix, for the production of reinforcement systems.

Rete composita in fibra di vetro realizzata con filato in vetro

TCS GLASS N40 is a composite fibreglass mesh made of E glass yarn with alkali resistant coating. The mesh in FRP ensures an excellent laying stability and workability on the construction site while maintaining a perfect alignment of the fibres. The net is applicable with an inorganic matrix, in particular with a natural hydraulic lime matrix, for the construction of subbases, screeds and reinforced plasters.

TCS GLASS R220-05AR | Calce TCS

TCS GLASS R220-05AR is a balanced fibreglass mesh made of yarn alkali resistant. The mesh is thermowelded by a thermo yarn in both weft and warp to ensure excellent stability of laying and workability on the construction site while maintaining a perfect alignment of the fibres. The mesh is in dry fibre applicable both with organic matrix for the production of FRP composite materials or inorganic matrix for the production of FRCM composite materials.

 

Rete in fibra di vetro bilanciata

TCS GLASS R220AR is a balanced fibreglass mesh made of yarn alkali resistant. The mesh is thermowelded by a thermo yarn in both weft and warp to ensure optimum stability of laying and workability at the worksite while maintaining a perfect alignment of the fibres. The mesh is in dry fibre applicable both with organic matrix for the production of FRP composite materials or inorganic matrix for the production of FRCM composite materials.

tessuto in fibra di acciaio galvanizzato

TCS STEEL G650 is a unidirectional high strength galvanised steel fibre fabric made of micro strands. The strands are thermowelded by a thermo yarn in both weft and warp to ensure excellent stability of laying and workability on the construction site while maintaining a perfect alignment of the fibres. The fabric is applicable both with organic matrix for the production of FRP composite materials or inorganic matrix for the production of FRCM composite materials.

Tessuto unidirezionale in fibra di acciaio inossidabile

TCS STEEL X800-A4 is a unidirectional stainless steel fibre AISI 316 with high strength fibre made up of micro cables. The cables are thermowelded by a thermo yarn in both weft and warp to ensure excellent stability of laying and workability on the construction site while maintaining a perfect alignment of the fibres. The fabric is applicable both with organic matrix for the production of FRP composite materials or inorganic matrix for the production of FRCM composite materials.

Tessuto unidirezionale in fibra di acciaio

TCS STEEL ZR1800 is a unidirectional high-strength steel fibre fabric made of micro strands. The strands are thermowelded by a thermo yarn in both weft and warp to ensure excellent stability of laying and workability on the construction site while maintaining a perfect alignment of the fibres. The fabric is applicable both with organic matrix for the production of FRP composite materials or inorganic matrix for the production of FRCM composite materials.

Tessuto unidirezionale in fibra di acciaio

TCS STEEL ZR750is a unidirectional high-strength steel fibre fabric made of micro strands. The strands are thermowelded by a thermo yarn in both weft and warp to ensure excellent stability of laying and workability on the construction site while maintaining a perfect alignment of the fibres. The fabric is applicable both with organic matrix for the production of FRP composite materials or inorganic matrix for the production of FRCM composite materials.

Barre elicoidali in acciaio inox

TCS TWIST 12A4 is the innovative stainless steel helical bar A4 class used for anchorages, connections and dry seams. The helix shape and strongly hardened steel give the bar a high strength and hardness, thus allowing a mechanical connection.

Barre elicoidali in acciaio

TCS TWIST 6A2 is the innovative stainless steel helical bar A2 class used for anchorages, connections and dry seams and reinforced joints. The helix shape and strongly hardened steel give the bar a high strength and hardness, thus allowing a mechanical connection.

Barre elicoidali in acciaio

TCS TWIST 9A2 is the innovative stainless steel helical bar A2 class used for anchorages, connections and dry seams. The helix shape and strongly hardened steel give the bar a high strength and hardness, thus allowing a mechanical connection.

Detergente disinfettante, battericida e germicida

THERMICAL DETERGENTE is a disinfectant, bactericidal and germicidal detergent, consisting of a mixture of quaternary ammonium salts with broad range of action. It is applied for the disinfection of surfaces with moulds, fungus, bacteria or bacterial micro flora in general.

Pittura coibente minerale biocompatibile

THERMICAL PITTURA is a biocompatible mineral insulating paint. It is composed of low specific weight silica micro spheres and lime putty obtained by baking pure limestones in vertical ovens at temperatures lower than 900°C, classified with the CL 90-S PL mark according to UNI EN 459-1. It is used naturally or mass-coloured with light resistant inorganic pigments for thermal painting.

Protettivo idrorepellente Silossanico

TI 10 is a Siloxane water-proof protection with low molecular weight, not film forming. Specific protections for brick, natural stone, plaster works and any other mineral substrate as long as it absorbent.

Protettivo idrorepellente Silano-Silossanico

TI 10 PLUS is Silane-Siloxane waterproof protection with a low molecular non-film forming. Specific protections for brick, natural stone, plaster works and any other mineral substrate as long as it absorbent.

Subscribe to our newsletter

  I declare that I have read and acknowledged the Information drawn up according to Legislative Decree 196/2003 'Code Concerning the Protection of Personal Data' and I give my consent to utilise my personal data in order to make use of the 'Newsletter' service with the methods described in the above-mentioned Information